Balboa 3.0KW Heater M7 with Studs (GS-GL)
Balboa 3.0KW Heater M7 with Studs (GS-GL)
Precio: 234,33 € ex. IVA
Codigo del articulo: HT-BST31

Estado del stock en tiempo real: 431 disponible, 2 - 5 dias de entrega

Agregue a la cesta:

Type of Product: Heater assembly
Manufacturer: Balboa
Power: Volts: 230
Hz: 50
KW: 3.0
Amps: 11.5-12.0
HP:
Specifications: Sensor compatibility: M7 24" x 2
Material spec: Incoloy
Required flow rate: 21gpm
Flow detection: M7 Technology by using a sensor at each end of the heater assembly
Compatible With: GS500, GS500Z, GS501, GS501Z (with 3.0KW on label only), GS501SZ, GS510, GS510S, GS510Z, GS510SZ, GS511SZ, GS523DZ, GL2000 mach 3, GL2001 mach 3 and more
Connections & Fixings: Usually held in with two fixing studs, one at the top and one underneath. 2" white plastic female sockets to connect to plumbing
Dimensions: Length: 381 mm
Diameter: 50.8 mm
Between terminals: 31.75 mm
Overall length complete: 495.3 mm
Additional Notes:

You may find cheaper versions of this heater on the internet but they are most likely cheap copies. If it is not an official Balboa product with genuine labeling do not buy it.

If your heater looks the same as this one it most probably is but contact us if you need further help.

The following related items may also be of interest: