Balboa GL2000 mach3 PCB
Balboa GL2000 mach3 PCB
Precio: 592,15 € ex. IVA
Codigo del articulo: CB-GL200

Estado del stock en tiempo real: 34 disponible, 2 - 5 dias de entrega

Agregue a la cesta:

Type of Product: PCB or Circuit Board
Manufacturer: Balboa
Power: Volts: 230
Hz: 50
Watts:
Amps:
HP:
Specifications: Pump 1: Single or dual speed pump + circulation pump if required.
Pump 2: Single or dual speed (if no blower used)
Pump 3 or Air Blower: x 1 (if pump 2 is single speed)
Extra port: Available only with the addition of an expander board
Heater: Yes
Ozone: Yes
Light: 12 volts or 230 volts
Sensor style: M7 x 2
Pressure Switch: No
Compatible With: GL2000/1 mach 3 control box. Topside controls from the high spec ML range such as theML400, ML700 or ML900.
Hot Tubs: Hydrospa Essence PCB SN HSEX2000 54234
(MUST NOT BE USED IN METAL BOX, FOR USE WITH PLASTIC BOX ONLY)
Dimensions: Length: 290 mm
Height: 155 mm
Additional Notes: This PCB is used as a replacement for an existing GL2000 mach 3 control box with a PCB failure. This must not be fitted to any other device/product. This should be done by an experienced tradesman or a competent individual as a faulty install could result in board damage and invalidate the warranty.

The following related items may also be of interest: