The M7 technology means you do not need to have sensors and flow switches going back into the tub as everything is done inside the control box by 2 sensors.

This deluxe Touch Pad or Topside control allows you to set your preferred filter times by a built-in clock. Its large screen also gives you detailed information about the operation of the Hot Tub and symbols display when the individual components are running. This system also displays when it is in a filter cycle and you can read the time from it also.

* Cables not Included *

*SPECIAL NOTE* J17 IS A PORT THAT ALLOWS YOU TO RUN EITHER AN AIR BLOWER OR ANOTHER SINGLE SPEED PUMP. THE PORT IS PROTECTED BY A 10 AMP QUICK BLOW FUSE.

• Useful notes: Most Spa Serve / Trade Price Group Spa's have 3 main pumps, 1 x Circ pump for heating, 1 x Small pump for Water Fountain and 1 x Air Blower. To combat the problem of 2 circ pumps we recommend one of the following 3 options...
• 1) Remove fountain pump and link the plumbing.
• 2) Power both Circ Pumps on the same relay.
• 3) Add an additional pneumatic button to operate fountain (this must be activated at least once a week to avoid stagnant water)
• *the above useful notes are designed to be understood by a qualified Spa Technician or a competent individual. We won't explain these points further as they could be misinterpreted to someone who does not have the necessary skills and therefore would not be safe for us to advise*

  SOMETIMES YOU MADE NEED LONGER CABLES TO CONNECT THE TOUCH PAD AND PUMPS THESE CAN BE FOUND IN THE RELATED ITEMS BELOW.